11 TUNING THE CHASSIS
11.8
48
400989-10
Checking riding sag of the shock absorber
400990-10
–
A
Measure dimension
of rear wheel unloaded. (
–
Hold the motorcycle perpendicular with the aid of an assistant.
–
Measure the distance between the rear axle and the fixed point
again.
–
Note down the value as dimension
Info
The static sag is the difference between
A
measurements
–
Check static sag.
Static sag
»
If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
(
p. 49)
Condition
The fuel tanks are half full.
–
A
Measure dimension
of rear wheel unloaded. (
–
With another person holding the motorcycle, the rider, wear-
ing full protective clothing, sits on the seat in a normal sitting
position (feet on footrests) and bounces up and down a few
times.
The rear wheel suspension levels out.
–
Another person now measures the distance between the rear
axle and the fixed point.
–
Note down the value as dimension
Info
The riding sag is the difference between
A
measurements
–
Check riding sag.
Riding sag
»
If the riding sag differs from the specified measurement:
–
Adjust the riding sag.
p. 47)
B
.
B
and
.
40 mm (1.57 in)
p. 47)
C
.
C
and
.
105 mm (4.13 in)
(
p. 50)