12.1
Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
12.2
Removing motorcycle from lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
12.3
Bleeding the fork legs
–
Use the engine guard underneath the engine to raise the vehi-
cle.
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
–
Remove motorcycle from the lift stand.
–
Remove lift stand.
–
To park the motorcycle, press side stand
with your foot and lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up
and secured with the rubber strap.
401943-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
A00451-11
Finishing work
–
Remove motorcycle from the lift stand. (
SERVICE WORK ON THE CHASSIS 12
1
1
.
to the ground
p. 55)
p. 55)
55