Adjusting The Riding Sag - KTM 450 Rally Factory Replica 2021 Owner's Manual

11 TUNING THE CHASSIS
11.10
50

Adjusting the riding sag

B00292-10
–
Remove motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Fold out the side stand and secure it.
–
Remove the seat. ( p. 67)
–
Remove main silencer. (
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
Main work
–
Choose and mount a suitable spring.
Guideline
Spring rate
Weight of rider: ≤ 65 kg
(≤ 143 lb.)
Weight of rider: 65 ...
75 kg (143 ... 165 lb.)
Weight of rider: 75 ...
85 kg (165 ... 187 lb.)
Weight of rider: 85 ...
95 kg (187 ... 209 lb.)
Weight of rider: ≥ 95 kg
(≥ 209 lb.)
Info
The spring rate is shown on the outside of the spring.
Smaller weight differences can be compensated by
changing the spring preload.
Finishing work
–
Install the shock absorber.
–
Install the main silencer. (
–
Mount the seat. ( p. 67)
–
Remove motorcycle from the lift stand. (
–
Check static sag of the shock absorber. (
–
Check riding sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
p. 55)
p. 55)
p. 70)
( p. 64)
48 N/mm (274 lb/in)
51 N/mm (291 lb/in)
54 N/mm (308 lb/in)
57 N/mm (325 lb/in)
60 N/mm (343 lb/in)
( p. 65)
p. 70)
p. 55)
p. 47)
p. 48)
p. 47)