KTM 450 Rally Factory Replica 2021 Owner's Manual page 126

18 SERVICE WORK ON THE ENGINE
124
–
Fill oil filter housing at opening
bubbles stop rising.
Total filling level, oil change
Engine oil
Total filling level, engine service (with oil radiator)
Engine oil
S03038-10
–
Mount and tighten filler plug
Guideline
Filler plug on the oil
filter housing
S03037-10
–
Remove filler plug
O-ring, and fill up with engine oil.
Total filling level, oil change
Engine oil
Total filling level, engine service (with oil radiator)
Engine oil
L02820-10
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
–
Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and check for leaks.
Finishing work
–
Check the engine oil level. (
–
Install the engine guard. (
9
with oil and wait until air
1.40 l Engine oil
(1.48 qt.) (SAE 10W/50)
( p. 164)
1.80 l Engine oil
(1.9 qt.) (SAE 10W/50)
( p. 164)
8
.
M20x1.5 8 Nm (5.9 lbf ft)
bk
from the clutch cover together with the
1.40 l Engine oil
(1.48 qt.) (SAE 10W/50)
( p. 164)
1.80 l Engine oil
(1.9 qt.) (SAE 10W/50)
( p. 164)
p. 121)
p. 89)