Replacing The Timing Belt; Replacing The Oil Filter - Kohler Lombardini LDW FOCS 502 Euro 2 Service Manual

9. Install the cooling fan.
10. Tighten the screws to a torque of 10 Nm.

8.3 REPLACING THE TIMING BELT

Important
• Replacement may be carried out with the engine installed
on the machine.
1. Switch off the engine and leave to cool.
2. Disassemble the cooling fan belt drive (see "Removing
the cooling fan belt drive").
3. Disassemble the timing belt drive (see "Removing the
timing belt drive").
4. Replace the timing belt with an original spare (see
"Assembling the timing belt drive").

8.4 REPLACING THE OIL FILTER

Important
• Replacement may be carried out with the engine
installed on the machine.
1. Switch off the engine and leave to cool.
2. Prepare a receptacle to catch leaks.
3. Remove the filter (A) using the special tool.
4. Lubricate the new filter seal with engine oil.
5. Install and tighten the filter manually.
Important
• Polluting substances should be disposed of properly,
in full compliance with the law.
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
REPLACING PARTS
flange
fan hub pulley
147
5. Check the timing belt rating (see "Checking timing belt
rating").
6. Mount the belt drive cover (see "Assembling the belt drive
cover").
7. Replace the cooling fan belt drive (see "Installation of the
cooling fan belt drive").
148
cooling fan
R
A
8
87