Disassembling The Timing Belt; Disassembling The Pulleys; (Camshaft And Crankshaft) - Kohler Lombardini LDW FOCS 502 Euro 2 Service Manual

5
4. Loosen the screws and remove the pulley (H).
5. Remove the casing (L).

5.4.2 Disassembling the timing belt

1. Twist the pulley nut (M) to fully loosen the belt (N).
2. Remove the belt (N), working it away in sequence first
from the pulley and (P) and then from the others.
Important
• The timing belt must always be replaced with an
original spare part whenever it is removed.
5.4.3 Disassembling the pulleys (camshaft and
crankshaft)
1. Remove the pulley (P).
2. Remove the pulley (Q).
34
REMOVING THE ASSEMBLIES
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
H
22
P
M
23
24
L
N
P
Q