Table of Contents
Advertisement
Any modifications to this document must be registered by the drafting body, by completing the following table.
Drafting
Document
body
code
Tech-Pubs
ED0053027270
Manual's purpose
This manual contains the instructions needed to carry out a proper maintenance of the engine, therefore it must always be
available, for future reference when required.
Safety pictograms can be found on the engine and it is the operator's responsibility to keep them in a perfectly visible place
and replace them when they are no longer legible.
Information, description and pictures in this manual reflect the state of the art at the time of the marketing ofengine.
However, development on the engines is continuous.Therefore, the information within this manual is subject to change without
notice and without obligation.
Lombardini Srl reserves the right to make, at any time, changes in the engines for technical or commercial reasons.
These changes do not require Lombardini Srl to intervene on the marketed production up to that time and not to consider this
manual as inappropriate.
Any additional section that Lombardini Srl will deem necessary to supply some time after the main text shall be kept together
with the manual and considered as an integral part of it.
The information contained within this manual is the sole property of Lombardini Srl As such, no reproduction or replication in
whole or part is allowed without the express written permission of Lombardini Srl
Data reported in this issue can be modified at any time by Kohler Engines .
2
REGISTRATION OF MODIFICATIONS TO THE DOCUMENT
Model
Edition
N°
-----
3°
Original instructions translated from the Italian language
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
Revision
Issue date
2
30.06.2005
Review
Endorsed
date
05.03.2020
Advertisement
Table of Contents
