Explanation Of The Safety Pictograms - Kohler Lombardini LDW FOCS 502 Euro 2 Service Manual

1
GENERAL REMARKS AND SAFETY INFORMATION
Explanation of the safety pictograms that can be found on the engine or in the Workshop manual
- Read the Operation and Workshop manual before
performing any operation on the engine
- High temperature components
- Danger of scalding
- Presence of rotating parts
- Danger of entangling and cutting
- Presence of explosive fuel
- Danger of fire or explosion
- Presence of steam and pressurized coolant
- Danger of scalding
Indications regarding the points on the engine where the safety pictograms are placed
- Ensure the good condition of safety signs.
- If the safety signs are damaged and / or illegible, you must replace them with other originals and place them in the positions
shown below.
- For cleaning use a cloth, water and soap.
10
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
- Use protective gloves before carrying out the
operation
- Use protective glasses before carrying out the
operation
- Use sound absorbing protections before carrying
out the operation
- Electric shock
- Danger of severe scalding or death
- Fluids under high pressure
- Danger of fluids penetration
- Lethal exhaust gas
- Danger of poisoning or death