Table of Contents
Advertisement
9. Mount the pulley (P), washers and spacer.
10. Tighten the screw (Q) to a torque of 25 Nm.
7.8.2 Assembling the fan belt drive
The engine may have an external or internal alternator.
With internal alternator
1. Install the belt, flange and the pulley hub (R).
2. Tighten the screws (S) to a torque of 10 Nm.
3. Carry out belt tension (see "Replacing alternator/fan
belt").
With external alternator
1. Install the flange and the pulley hub (R).
2. Tighten the screws (S) to a torque of 10 Nm.
3. Install the belt (T).
4. Tighten the belt (T) (see "Replacing the alternator –
fan belt").
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
INSTALLATION OF ASSEMBLIES
P
Q
134
With internal alternator
R
S
135
T
136
7
With external alternator
R
S
81
Advertisement
Table of Contents
