Authorisation

forgot your password?
 
OWNE
operating and maintenance
Congratulations - You
have selected a fine four-cycle,
life strength and on-the-job
vou can count on. Here are some reasons why:
Parts subject to the most wear and tear (like cylinders,
formulated
cast iron. Because the cast iron cylinders
Kohler engines are easy to service. All routine service areas (like the dipstick, oil filter, breaker points, air
cleaner, spark plugs, and carburetor)
Every Kohler engine is backed by a worldwide
support is just a phone call away. Call I-800-544-2444
To keep your engine in top operating
I
/
Y
R
S
instructions
into each engine.. . making a Kohler engine dependable..
durability
are easily and quickly accessible.
network of over
condition,
follow the maintenance
MAN UAL
MODELS
(17
hP)
*with Full Pressure Lubrication
twin cylinder, air-cooled engine. Kohler designs long
crankshaft,
and camshaft) are made from precision
can be rebored, these engines can last even longer.
10,000
distributors
(U.S. & Canada) for Sales & Service assistance.
procedures in this manual.
(19
hP)
.dependability
and dealers. Service
\
Next page ->

Summary of Contents

  • Page 1

    Parts subject to the most wear and tear (like cylinders, formulated cast iron. Because the cast iron cylinders Kohler engines are easy to service. All routine service areas (like the dipstick, oil filter, breaker points, air cleaner, spark plugs, and carburetor) Every Kohler engine is backed by a worldwide support is just a phone call away.

  • Page 2

    For Your Safety! These precautions should be followed at all times. Failure to follow these precautions could result in iniurv to vourself and others, A WARNING Explosive Fuel can cause fires and severe burns. Stop engine before filling fuel tank. Explosive Fuel! Gasoline is extremely flammable...

  • Page 3

    A WARNING Accidental Starts can cause severe injury or death. Disconnect and ground spark plug lead before servicing. Accidental Starts! Before servicing the engine or equipment, always disconnect spark plug leads to prevent the engine from starting accidentally Ground the leads to prevent sparks that could cause fires.

  • Page 4

    Dark Blower Housing Oil Fill Vluffler. Air Intake Screen Fins Straight 30-weight (Kohler preferred. SAE IOW-30 above 32°F. Using this oil substantially consumption and combustion NOTE: Using other than service class SG or SH oil or extending oil change intervals...

  • Page 5

    Gasoline/Ether Methyl Tertiary Butyl Ether (MTBE) and unleaded gasoline blends (up to a maximum volume) are approved as a fuel for Kohler engines. Other gasoline/ether Engine Identification Numbers When ordering parts, or in any communication and store in...

  • Page 6

    Do not jump start using another battery (refer to “Battery” below). See your Kohler Engine Service Dealer for trouble analysis. On a Cold Engine - Gradually control to the “off” position after the engine starts and warms up.

  • Page 7

    Have valve and tappet clearance checked*. Have cylinder heads serviced2f3. 1Perform these maintenance procedures 2Have a Kohler Engine Service Dealer perform this service. 3250 hburs when leaded gasoline is used. Cooling NOTE: If debris builds up on the grass screen or other cooling air intake areas, stop the engine immediately and clean.

  • Page 8

    Check Oil Level The importance of checking and maintaining proper oil level in the crankcase cannot be overemphasized. Check oil BEFORE follows: 1. Make sure the engine is stopped, cool so the oil has had time to drain into the sump.

  • Page 9

    “Oil Change Intervals” table on page 8. Always use a genuine Kohler oil filter, Part No. 52 050 02, and replace as follows: Drain the oil from the engine crankcase.

  • Page 10

    Do not over-tighten. 7. When ai r cleaner necessa .ry always use genuine Kohler parts. Clean Air Intake/Cooling Areas To ensure proper cooling, make sure the grass screen, cooling fins, and other external surfaces of the engine are kept clean at all times.

  • Page 11

    The main fuel jet is calibrated installed at the factory and is not adjustable*. *NOTE: KT17 and KT19 engines with fixed jet carburetors, operating approximately “high altitude” main jet. See your Kohler Engine Service Dealer for further information.

  • Page 12

    Kohler Adjustable Low Idle 1 KT17 1 turn 1 turn 1 KT19 3. Start the engine and run at half throttle for 5 to IO minutes to warm up. The engine must be warm before making final settings (steps 4, 5, 6, and 7).

  • Page 13

    Walbro Fixed Jet Low Idle KT17 1 -l/4 turns l-1 /4 turns KT19 Walbro Adjustable Low idle KT17 1-l /4 turns KT19 1-I /4 turns 3. Start the engine and run at half throttle for five to ten minutes to warm up. The engine must be warm before making final settings.

  • Page 14

    Do not attempt to service or replace major engine components, or any items that require special timing or adjustment procedures. Have your Kohler Engine Service Dealer do this work. Improper Possible Cause No...

  • Page 15

    Our obligation under this warranty is expressly limited, at our option, to the replacement or repair at Kohler Co., Kohler, Wisconsin 53044, or at a service facility designated by us, of such part or parts as inspection shall disclose to have been defective.

  • Page 16

    ENGINE DIVISION, FOR SALES AND SERVICE INFORMATION FORM NO.: TP-2107-C ISSUED: 4187 REVISED: 12/95 MAILED: LITHO IN U.S.A. KOHLER CO., KOHLER, WISCONSIN IN U.S. AND CANADA, CALL l-800-544-2444 53044...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: