Replacing V-Ribbed Belt - Sl - Kohler KD62V12 Operation And Maintenance Manual

Operation and Maintenance Manual
Fig. 51: Damage to the V-ribbed belt
The belt attachment is self-tensioning and maintenance-free.
The belt drive is located at the engine damper side.
In case of wear, have the belt replaced immediately by the competent personnel.
5.6.5 Replacing V-ribbed belt — SL 109
Make sure that:
– 1x new V-ribbed belt is provided.
– 1x new tensioning device is available.
– 1x ratchet wrench (1/2-inch square drive) with lever is available.
The battery charging alternator cover is dismounted.
the battery charging alternator cover, page 95)
V-ribbed belt removal
Fig. 52: Removing V-ribbed belt
u Mount ratchet wrench with lever to the corresponding tensioning device.
KD62V12 33521030301_6_1 EN_US
2019-02
.
© 2019 by Kohler Co. All rights reserved.
Daily or monthly maintenance activities
(For more information see: 5.6.3 Removal of
Maintenance
97