Table of Contents
Advertisement
5. Tighten the screws in a crisscross pattern, and tighten
each of them to their respective final torques (see
image).
6. Insert the key (D) into the crankshaft.
7. Install the alternator support (E) and tighten the screws
to a torque of 2.2Nm.
7.5.7 Assembling the flywheel
1. Install the support (F) and tighten the screws to a
torque of 25 Nm.
2. Install the flywheel (G) and put in the screws (H).
3. Tighten the screws temporarily in a crisscross pattern.
4. Tighten the screws in a crisscross pattern to a final
torque of 80Nm.
Important
• Turn the flywheel manually to check the movement of
the mechanical parts.
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
INSTALLATION OF ASSEMBLIES
107
F
108
G
109
7
E
D
oil pump activation
key
H
71
Advertisement
Table of Contents
