5
5.6.3 Disassembling the crankcase and crankshaft
1. Remove the flange (H).
2. Tske off the gasket (L).
3. Remove the crankcase (M).
4. Remove the connecting rod cap (N).
Warning
• Before removing the cap, mark the area of contact
with the connecting rod, in order to recognise the
right position during reassembly.
5. Remove the crankshaft (P) and place it in a container
for washing.
40
REMOVING THE ASSEMBLIES
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
L
39
40
N
41
H
M
P