Table of Contents
Advertisement
17
18
20
KD 702_1003_1404 Workshop Manual_cod. ED0053029340_1° ed_
19
Disassembly / Reassembly
Cooling fan
Danger - Attention
Carry out the cooling fan disassembly, only after isolating
the positive battery cable to prevent accidental short-
circuiting and, consequently, the activation of the starter
motor.
Carefully clean and check all blades. Replace the fan even if there
is only a single damaged blade.
See pages 20-21 for cooling air flow volume.
Alternator/Cooling fan belt drive
Danger - Attention
Check the belt tension only with the engine off.
Tension adjustment.
Loosen screws 1 and 2.
Adjust the belt tension so that a 100N force at the midpoint of
the belt center (as shown) results in a 10-15mm deflection.
See page 32 for periodic maintenance details.
Fuel tank (optional)
Danger - Attention
To avoid explosions or fire outbreaks, do not smoke or use
naked flames during the operations.
Fuel vapours are highly toxic. Only carry out the operations
outdoors or in a well ventilated place. Keep your face well
away from the plug to prevent harmful vapours from being
inhaled.
Dispose of fuel in the correct way and do not litter as it is
highly polluting.
After disconnecting the fuel pipes unscrew the anchoring
brackets' screws and remove the fuel tank.
Completely empty the tank and check that no impurities are
found inside.
Check that cap breather hole is not clogged.
6
- 43 -
Advertisement
Table of Contents
