Entering Commands
When you reach the menu level containing the specific command
you want to enter, you are prompted for a command name.
Commands can also be entered at the end of the menu string.
Where applicable, default values for commands are shown in
parentheses after the prompt. If you press Return for a command
with such a value, the unit continues to use that value.
Returning to the Previous Menu
You can return to the previous menu, by entering q at the prompt.
Returning to the Top-level Menu
You can return to the top-level menu by pressing Esc.
Obtaining Help
You can get help at any time by entering ? at the prompt.
Quick Guide to the Commands
Table 5
Table 5 Command Line Interface Commands
Command
Ethernet Menu
autoNegotiation
detail
portMode
portState
security
(continued)
lists all the commands available below the top level headings.
What does it do?
Enables and disables auto-negotiation for
ports on the current unit in the stack.
Displays detailed information and statistics
about a single Ethernet port.
Specifies the speed of ports on the current
Hub in the stack.
Enables and disables ports on the current
unit in the stack.
Allows you to set security on a port.
Quick Guide to the Commands
43
Described
on...
page 56
page 56
page 59
page 54
page 59