Table of Contents
Advertisement
3Com's Transcend
the tasks that the command line interface and web interface can.
It also allows you to perform remote monitoring using RMON.
For more information about Transcend Enterprise Manager and other
3Com SNMP network management applications, refer to
Network Management"
RMON, refer to
Management of the Distance Extender Modules
Using the management interfaces that are provided by the
management module, you can:
Enable and disable the Distance Extender Module port.
View traffic statistics, the link status and the port state.
Management of a Different Hub or Stack
If you have connected a different unit or stack to the Dual Speed
Hub 500 stack with a Cascade Converter Kit, you can use the web
interface that is provided by the management module to access the
attached stack's management screens. For information on doing this,
refer to
use the Dual Speed Hub 500 – Hub 10 Cascade Converter Kit to
connect a Hub 10 stack to the Dual Speed Hub 500 stack.
Removing Management From the Hub
If the management module is removed from the hub (or the hub is
separated from a unit with a module in it), there is a 3 minute period
during which the hub remains managed (this is so that it is not
affected by any quick disconnections between the units in the stack).
If the hub does not have access to a management module after that
period, the hub can no longer be managed but retains its
configuration so that it can continue to operate as configured.
Without a management module, the hub cannot:
Respond to any type of management communication
Perform resilient links
Generate SNMP traps
Perform RMON
®
Enterprise Manager enables you to perform all of
on
"RMON"
"Accessing a Different Hub or Stack"
Management Features
page
27. For more information about
on
page
27.
"SNMP
on
page
101. You can
25
Advertisement
Table of Contents
