120
A
PPENDIX
4 The connection is successful if the web interface's password panel is
displayed. You are now ready to manage the unit; refer to
Web
Solving Problems With the Serial Web Utility
If you are unable to connect to the unit's web interface, it may be
that:
The unit is not powered on.
You are not using a proper null modem cable, refer to
of Null Modem Cables You Can Use"
The following settings are different on your unit and
management station:
The unit has automatically configured its communication speed,
but you have subsequently changed the speed configured on
your management station (the device only automatically
configures the speed the first time it connects).
You have selected the wrong COM port on your management
station.
To change some of the settings for the management station, use the
Advanced Configuration Parameters dialog box. To display this, select
the Serial Web Setup program item in the Serial Web program group.
B: S
W
U
ERIAL
EB
TILITY
Interface".
Flow control.
Speed (baud rate).
"Using the
on
page
113.
"Examples