3Com 3C16685 User Manual page 49

Re-enter the password:
4 Enter the password for the user again. The following prompt is
displayed:
Enter the community string [<user>]:
5 Enter a community string for the user.
Removing User Details
You can remove user details from the stack using the remove
command on the System/Security/User menu.
To remove user details from the stack:
1 From the Top-level menu, enter:
system security user remove
The following prompt is displayed:
Enter the user name (<users>,all):
2 Enter the name of the user that is to have its details removed, or
enter all to remove the details of all users (except default users).
Displaying Access Rights
You can display the access rights for all access levels in the stack
using the display command on the System/Security/Access menu.
To display the access rights for the stack:
From the Top-level menu, enter:
system security access display
The access rights are displayed.
An example of the access rights information is shown below:
Access Level
monitor
manager
security
Modifying Access Rights
You can modify access rights for the access levels in the stack using
the modify command on the System/Security/Access menu.
To modify the access rights for the stack:
1 From the Top-level menu, enter:
system security access modify
SNMP Console
enable enable
enable enable
enable enable
Commands
Telnet Web
enable enable
enable enable
enable enable
49