Using The Web Interface; Accessing The Web Interface - 3Com 3C16685 User Manual

Superstack ii dual speed hub management module
Table of Contents

Advertisement

4
This chapter describes how to use the web interface. If you have any
problems using the web interface, refer to
the Web Interface"

Accessing the Web Interface

You can access the web interface for the stack either through the
console port or over the network. Ensure that your management
station has been appropriately set up for your particular
management method and that any necessary connections have been
made, refer to
If you want to access the web interface through a serial link from a
Windows 95 management station (connected to the console port of
a unit in the stack), you must use a SLIP driver that sets up SLIP access
for web interface management. A suitable SLIP driver (the 3Com
serial web utility) is supplied on the CD-ROM that accompanies the
management module; refer to
Any number of people can access the web interface over the
network, at the same time. There is a password panel to prevent
unauthorized management of the stack.
To access the web interface:
1 Start your Web browser.
2 In the browser, select the option for opening a location.
3 In the browser's open location window or area, enter the Web
address URL (Uniform Resource Locator) for the stack.
The Web address URL for a stack is in the format:
http://nnn.nnn.nnn.nnn/
U
SING THE
on
page
"Web Interface"
W
I
EB
NTERFACE
"Solving Problems With
107.
on
page
35.
Appendix
B.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dual speed hub 500 mgmt moduleDual speed hub 500

Table of Contents