3Com 3C16685 User Manual page 53

Time since reset: 2 days, 3 hours, 10 minutes
Operational Version: 2.14
Hardware Version: 2.00
Boot Version: 1.00
MAC Address : 08:00:4e:4f:9c:42
Product Number : 3C16611
Serial Number: 2103332
In the example above, you will see the term 'Operational Version".
This is the same as the software agent version. It is diffentiated to
avoid confusion with the BOOT version.
This information is in the unit's MIB (Management Information Base)
and is read-only. You can change the Unit name, Location and
Contact using the web interface.
If a problem occurs and you need advice from your support
representative, you may be asked for some of the information shown
on this screen.
Displaying Summary Information for the Stack
The inventory command allows you to list the units in the stack.
At the top-level menu, enter:
system inventory
The command line interface displays the position, description, name
and state of the units in the stack.
Where:
Position — The position of the unit in the stack; if the stack is
correctly connected and configured as recommended, the bottom
unit in the stack is unit number 1, the next unit is unit number 2,
and so on.
Description — The type of unit.
Unit Name — The name that you have assigned to the unit.
State — The current operating status of the unit:
Unit Operational — Indicates that the unit is operating
normally.
Unit Loading — Indicates that there is a process taking place,
for example a software upgrade.
Commands 53