3Com 3C16685 User Manual page 44

44 C 3: U
HAPTER
Table 5 Command Line Interface Commands (continued)
Command
segment cascade-
Connection
detail
label
summary
switch
switchState
smartAutosensing
summary
IP Menu
initializeConfig
interface bootp
define
display
ping
SNMP Menu
community
get
next
(continued)
C
SING THE OMMAND
What does it do?
Connects or disconnects a segment from
the cascade unit.
Displays detailed information and statistics
about a single Ethernet segment.
Allows you to set the name (label) of an
Ethernet segment.
Displays summary information about a
single Ethernet segment or all segments.
Allows you to disable the segment switch
between segments.
Enables and disables Smart auto-sensing for
the stack.
Displays information about the ports on the
current unit in the stack.
Allows you to reset the IP configuration
back to factory defaults. This command
operates on the entire stack.
Enables and disables BOOTP for the current
unit in the stack.
Specifies IP and SLIP information for the
current unit in the stack.
Displays IP and SLIP information for the
current unit in the stack.
Allows you to PING other devices on your
network.
Allows you to set the SNMP community
string for all units in a stack.
Performs an SNMP GET instruction, that
allows you to retrieve values of SNMP
objects from the stack.
Performs an SNMP GETNEXT instruction,
that allows you to specify an SNMP object
and then retrieve the next few SNMP
objects from the stack.
L I
INE NTERFACE
Described
on...
page 64
page 61
page 61
page 63
page 65
page 65
page 54
page 68
page 52
page 51
page 52
page 68
page 70
page 72
page 72