This Guide - 3Com NETBUILDER II Installation Manual

Introduction
Conventions
A T
BOUT HIS
This guide describes how to install, cable, maintain, and troubleshoot the HSS RS-232
3-Port DCE/DTE module for the NETBuilder II
applies to all NETBuilder II chassis.
For more information about the NETBuilder II base system installation, refer to the
NETBuilder II Base System Installation Guide .
This guide is intended for the system administrator, network equipment installer, or
network manager who is responsible for installing and managing the network
hardware. It assumes a working knowledge of network operations, but it does not
assume prior knowledge of 3Com
If the information in the release notes shipped with your product differs from the
information in this guide, follow the release notes.
Table 1 lists the notice icons that are used throughout this guide, and Table 2 lists text
conventions that are also used throughout this guide.
Table 1 Notice Icons
Icon Type
Information Note Information notes call attention to important features or
Caution
Warning
G
UIDE
®
system. The information in this guide
® internetworking equipment.
Description
instructions.
Cautions alert you to personal safety risk, system damage,
or loss of data.
Warnings alert you to the risk of severe personal injury.