3Com 3C16685 User Manual page 71

snmp trap define
You are then prompted to enter the trap community string:
Enter the trap community string [monitor]:
2 You are then prompted to enter the trap destination address:
Enter the trap destination address:
Displaying Trap Destination Details
You can display the community string and IP addresses of the current
trap destinations using the display command on the SNMP/Trap
menu.
To display trap destination details, at the Top-level menu, enter:
snmp trap display
The trap destination details are displayed.
An example of the information is shown below:
Index Community String
1 monitor
2 monitor
3 monitor
4 monitor
Modifying Trap Destination Details
You can modify the community string and IP address of a current trap
destination using the modify command on the SNMP/Trap menu.
To modify trap destination details:
1 At the Top-level menu, enter:
snmp trap modify
The following prompt is displayed:
Select trap index (1,2,3):
2 Enter the index number of the trap destination to be modified.
The following prompt is displayed:
Enter the trap community string [monitor]:
3 Enter the new community string of the trap destination.
The following prompt is displayed:
Commands
Destination Address
192.168.100.1
192.168.100.2
192.168.100.3
192.168.100.4
71