3Com 3C16685 User Manual page 74

74 C 4: U
HAPTER
Where nnn.nnn.nnn.nnn is:
The SLIP address for the stack, which is '192.168.101.1' by
default, if managing through the console port
The IP address for the stack, if managing over the network
For example, to access a stack with an IP address of '192.168.100.8'
you would enter:
http://192.168.100.8/
4 When the browser has located the stack, a password panel is
displayed, as shown in
as requested.
Figure 7 Password Panel
The user names and passwords are the same as those that you use to
access the command line interface. For a list of the user names and
the default passwords, refer to
on page
We recommend that when you have accessed the stack, you change
the default passwords for the user levels (if you have not already
done so) by logging in as the different user levels. If you forget your
password while logged out of the stack, refer to
With the Web Interface"
When the correct user name and password have been entered, the
web interface appears. You are now ready to manage the stack.
If you are unable the access the web interface, refer to
Problems With the Web Interface"
W I
SING THE EB NTERFACE
Figure
38.
7. Enter your user name and password
"Default User Names and Passwords"
on page 107.
on page
"Solving Problems
"Solving
107.