Using The Serial Web Utility - 3Com 3C16685 User Manual

6 When you have finished, the final installation dialog box is displayed
informing you that the serial web utility has been installed on your
management station. Click on Finish to close the dialog box.
7 You are asked if you want to restart Windows so that it can use the
new settings you have configured. You must restart Windows before
running the serial web utility.
When you return to the Windows desktop, the serial web utility
shortcut ('Serial Web Management') created by the installation
program is visible. The utility also has its own program group called
'Serial Web' under the default program group specified during the
install, which contains:
Serial Web Management — Launches the serial web utility.
Serial Web Setup — Displays the Advanced Configuration
Parameters dialog box, which allows you to view and change
some of the settings the serial web utility uses when it is run.
License agreement.

Using the Serial Web Utility

Every time you want to access the web interface through a serial link,
make your management connection (refer to
Port"
connection:
1 Do one of the following:
Double-click on the Serial Web Management shortcut.
Select the Serial Web Management program item in the Serial
Web program group.
2 The serial web utility opens and asks you if you want to use the URL
that has been set up. The URL includes the unit's SLIP address. For
example, if the SLIP address for the unit is '192.168.101.1', the URL
is: http://192.168.101.1
If you want to change the URL, click URL. If the URL is correct, click
OK.
3 The serial web utility attempts to establish a connection.
If successful, the standard Windows Dial-Up Networking dialog box
is displayed, showing the various connection details. Your default
Web browser is then launched with the specified URL.
on page 35) and use the serial web utility to set up your
Using the Serial Web Utility
"Through the Console
119