Panasonic KX-TDA30 Features Manual page 168

1.17 Caller ID Features
Incoming Call Log
3.
Number/Name Assignment
3.1
Automatic Caller ID Number Modification
This PBX automatically modifies the incoming caller's number according to preprogrammed tables.
The modified number will be recorded for calling back.
The PBX supports a number of modification tables, and each trunk group can select a table for use.
Each table has 10 locations for local/international calls and one for long distance calls.
The PBX checks the local/international call data first. If a match is not found, the long distance call
data is applied.
[Example]
<Table Selection>
Trunk
Group No.
1
2
:
Note
When caller's information is sent through an ISDN line and the call type is Subscriber,
National, or International, the following modification table is used instead of the above table:
<Modification Table>
Subscriber Call Data
National Call Data
International Call Data
168 Feature Guide
Features
Caller's information is automatically recorded in the call log of the
called extension. This information is used for confirming the caller,
calling the caller back, and/or storing the number and name in the
Personal Speed Dialling.
→ 1.17.2 Incoming Call Log
Modification
<Modification Table>
Table
1
3
:
Removed No. of Digits Added No.
Description & Reference
Modification Table 1
Area Code
Local/International
012
Call Data 1
Local/International
00
Call Data 2
: :
Local/International
Call Data 10
Long Distance Call Not
Data 1 programmable
0
Blank
0 0
0
00
Removed No. of Digits Added No.
Blank
3
2 001
: :
0
0