1.27 Extension Controlling Features
1.27.5 Remote Extension Control by User
Description
A user can remotely change the feature settings (e.g., FWD) and time service mode for his own extension
from inside or outside the PBX using DISA (→ 1.16.6 Direct Inward System Access (DISA)). This feature
can be used only on the extensions which are allowed to be controlled remotely on a COS basis.
The following features are available:
a)
FWD/DND (→ 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND))
b)
Log-in/Log-out (→ 1.2.2.6 Log-in/Log-out)
c)
Absent Message (→ 1.18.2 Absent Message)
d)
Extension Lock (→ 1.8.3 Extension Lock)
e)
Time Service—Changing the Time Mode (day/lunch/break/night) (→ 2.2.4 Time Service)
This feature is also known as Remote Station Control by User.
Conditions
•
Extension PIN
An extension personal identification number (PIN) (→ Extension Personal Identification Number (PIN)
[005]) is required to use this feature. (→ 1.27.1 Extension Personal Identification Number (PIN)) If the
wrong PIN is entered three times, the line will be disconnected.
•
Remote operation is not available for the extensions in the Internal Call Block mode. (→ 1.1.2.2 Internal
Call Block)
User Manual References
1.2.9 Setting Your Telephone from Another Extension or through DISA (Remote Setting)
254
Feature Guide