Panasonic KX-TDA30 Programming Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. PBX
  5. KX-TDA30
  6. Programming manual
Panasonic KX-TDA30 Programming Manual

Panasonic KX-TDA30 Programming Manual

Hybrid ip-pbx pt programming manual
Hide thumbs Also See for KX-TDA30:
Table of Contents

Advertisement

Quick Links

See also: Pc Programming Manual , Feature Manual
Hybrid IP-PBX
PT Programming Manual
KX-TDA30/KX-TDA100
KX-TDA200/KX-TDA600
Model
Thank you for purchasing a Panasonic Hybrid IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDA30: PSMPR Software File Version 3.0000 or later
KX-TDA100/KX-TDA200: PMPR Software File Version 3.0000 or later
KX-TDA600: PLMPR Software File Version 3.1000 or later

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TDA30

Summary of Contents for Panasonic KX-TDA30

  • Page 1 Thank you for purchasing a Panasonic Hybrid IP-PBX. Please read this manual carefully before using this product and save this manual for future use. KX-TDA30: PSMPR Software File Version 3.0000 or later KX-TDA100/KX-TDA200: PMPR Software File Version 3.0000 or later...
  • Page 2 Introduction About this Programming Manual The PT Programming Manual is designed to serve as a reference to programming the Panasonic Hybrid IP-PBX using a Panasonic proprietary telephone (PT) with display. The PT Programming Manual is divided into the following sections: Section 1, Overview Provides an overview of programming the PBX.
  • Page 3 Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www.doc.panasonic.de...

  • Page 4: Table Of Contents

    Table of Contents Overview....................9 Introduction ........................10 1.1.1 Introduction ........................10 1.1.2 Password Security......................11 1.1.3 Entering Characters ......................12 PT Programming................... 17 PT Programming ......................18 2.1.1 Programming Instructions ....................18 2.1.2 Maximum Values ......................21 2.1.3 Basic Programming......................24 [000] Date & Time............................24 [001] System Speed Dialling Number......................24 [002] System Speed Dialling Name.........................
  • Page 5 [322] ARS Routing Plan Table Number......................34 [325] ARS Exception Number ..........................34 [330] ARS Routing Plan Time Table ........................34 [331–346] ARS Routing Plan Table (1–16) (KX-TDA30/KX-TDA100/KX-TDA200 only)........35 [347] ARS Routing Plan Table (1–48) (KX-TDA600 only) ................35 [350] ARS Carrier Name..........................35 [351] ARS Trunk Group for Carrier Access ......................35 [352] ARS Removed Number of Digits for Carrier Access................35...
  • Page 6 [699] CS Status Reference..........................52 2.1.10 Resource/Interface Programming ..................53 [700] External Pager Floating Extension Number ................... 53 [710] Music Source Selection for BGM (with the KX-TDA30)/BGM2 (with the KX-TDA100/KX-TDA200/KX- TDA600) ................................53 [711] Music on Hold............................53 [712] Music for Transfer ........................... 53 [720] Doorphone Call Destination ........................
  • Page 7 [811] Modem Floating Extension Number .......................57 [812] ISDN Remote Floating Extension Number .....................57 2.1.12 Card Programming ......................58 [900] Slot Card Type Reference........................58 [901] Slot Card Deletion...........................58 [902] Slot Card Reset ............................58 [910] OPB3 Option Card Type Reference (KX-TDA100/KX-TDA200/KX-TDA600 only)........58 [911] OPB3 Option Card Deletion (KX-TDA100/KX-TDA200/KX-TDA600 only)..........58 Appendix....................59 Revision History ......................
  • Page 8 PT Programming Manual...

  • Page 9: Overview

    Section 1 Overview This section provides an overview of programming the PBX. PT Programming Manual...

  • Page 10: Introduction

    These programming instructions are designed to serve as an overall system programming reference for the Panasonic Hybrid IP-PBX. Each feature in the PBX has default settings that can be changed to customise the PBX to your requirements. These settings control the functions of the PBX, and changing them is referred to as "system programming".

  • Page 11: Password Security

    1.1 Introduction 1.1.2 Password Security To maintain system security, system passwords are required to access certain programming functions of the PBX. By giving different users access to different passwords, it is possible to control the amount of programming that each user is able to perform. The following types of system passwords are available: Password Description...

  • Page 12: Entering Characters

    1.1 Introduction 1.1.3 Entering Characters The following characters can be used when storing a name, message, or other text entry data using a PT. The tables below show you the characters available by pushing each button a specific number of times. Table 1 (Standard mode) Table 1 (Standard mode for RU model) PT Programming Manual...
  • Page 13 1.1 Introduction Table 2 (Option mode) Table 2 (Option mode for CE model) PT Programming Manual...
  • Page 14 1.1 Introduction Table 2 (Option mode for GR model) Table 2 (Option mode for RU model) PT Programming Manual...
  • Page 15 1.1 Introduction [Example of Entering Characters] To enter "Ann": (5 times) (5 times) FWD/DND Notes • To erase the character on the cursor, press CLEAR. • To move the cursor to the left, press • To move the cursor to the right, press .
  • Page 16 1.1 Introduction PT Programming Manual...

  • Page 17: Pt Programming

    Section 2 PT Programming This section serves as reference operating instructions when using a display PT to program the PBX. PT Programming Manual...

  • Page 18: Pt Programming

    2.1 PT Programming PT Programming 2.1.1 Programming Instructions Required Telephone/Extension PBX settings can be customised through system programming by using a proprietary telephone (PT) with a multiline display, such as the KX-T7636. To access system programming, the Class of Service (COS) assigned to the PT's extension must be programmed to allow system programming, or the PT must be connected to the lowest-numbered port on the card installed in the lowest-numbered slot.
  • Page 19 2.1 PT Programming Fixed Buttons Function T7600/NT136 T7200/T7400/T7500* AUTO ANS SELECT MESSAGE AUTO ANSWER MESSAGE MUTE MUTE FLASH/ FLASH FLASH RECALL TRANSFER CLEAR TRANSFER INTERCOM SECRET INTERCOM *: The buttons shown in this column are from the KX-T7400 series. Entering System Programming Mode Using a PT to perform system programming allows an authorized extension user to set a wide range of PBX features and parameters.
  • Page 20 2.1 PT Programming Programming Programming Group Title Description Number [2XX] Timer Programming System timers TRS/Barring/ARS TRS/Barring and Automatic Route [3XX] Programming Selection (ARS) programming [4XX] Trunk Programming Trunk, trunk group, and BRI line settings [5XX] COS Programming Class of Service parameters [6XX] Extension Programming Extension feature settings...

  • Page 21: Maximum Values

    Extension Numbers (Including Feature Numbers) • KX-TDA30/KX-TDA100/KX-TDA200: 1–4 digits • KX-TDA600: 1–5 digits KX-TDA30 Slot and Port Values Available Slot Entry Values Slot Number Supported Cards Pre-installed Super Hybrid Ports 02–04 BRI1, BRI2, DLC4, LCOT2, LCOT4 cards 05–07...
  • Page 22 2.1 PT Programming Card Type Port Number Related Programming Pre-installed Super Hybrid Ports 01–04 [600] [601] Enter values as two-digit numbers (e.g. "04" for port 4). KX-TDA100/KX-TDA200/KX-TDA600 Slot and Port Values Available Slot Entry Values KX-TDA100/KX-TDA200 PBX Model Slot Number Supported Cards KX-TDA100 01–06...
  • Page 23 2.1 PT Programming Card Type Port Number Related Programming LCOT4 (KX-TDA100/KX- 01–04 TDA200 only) LCOT8 (KX-TDA100/KX- 01–08 TDA200 only) [400] [409] [41x] [450] LCOT16 (KX-TDA100/KX- 01–16 TDA200 only) ELCOT16 (KX-TDA600 only) 01–16 Enter values as two-digit numbers (e.g. "04" for port 4). *: Enter card number and port number as single-digit numbers (e.g.

  • Page 24: Basic Programming

    2.1 PT Programming 2.1.3 Basic Programming [000] Date & Time [In 12-hour Format] [000] Year Month Date 01–12 01–31 00–99 ENTER ENTER Minute Hour SELECT 00–59 (AUTO ANS/MESSAGE) 01–12 ENTER NEXT (HOLD) AM/PM [In 24-hour Format] [000] Year Date Month 01–12 00–99 01–31...

  • Page 25: Extension Name

    ENTER ENTER 3 Break/4 Night [007] DSS Console Paired Telephone [007] DSS Console No. Extn. No. KX-TDA30: 01–04 ENTER ENTER KX-TDA100: 01–08 KX-TDA200: 01–08 KX-TDA600: 01–64 Note This programme is only available after the port connected to the DSS Console is assigned as "DSS Console"...

  • Page 26: Absent Message

    Location No. Tax XX.YY% 01–03 2+2 decimal places ENTER ENTER [012] Charge Rate per Unit [012] Charge Rate Trunk Group No. KX-TDA30: 01–64 Max. 8 digits ENTER ENTER KX-TDA100: 01–64 including decimal point KX-TDA200: 01–64 KX-TDA600: 01–96 PT Programming Manual...

  • Page 27: System Management Programming

    2.1 PT Programming 2.1.4 System Management Programming [100] Flexible Numbering [100] Location No. Feature No. 01–68 ENTER ENTER (HOLD) To the Next Location No. To the Desired Location No. NEXT CANCEL [101] Time Service Switching Mode [101] SELECT (AUTO ANS/MESSAGE) Manual/Automatic ENTER ENTER...

  • Page 28: Idle Line Access (Local Access)

    To the Next Time No. To the Next Day No. NEXT Page up [103] Idle Line Access (Local Access) [103] Location No. Trunk Group No. KX-TDA30: 01–64 KX-TDA30: 01–64 ENTER ENTER KX-TDA100: 01–64 KX-TDA100: 01–64 KX-TDA200: 01–64 KX-TDA200: 01–64 KX-TDA600: 01–96 KX-TDA600: 01–96...

  • Page 29: Verification Code Name

    2.1 PT Programming [121] Verification Code Name [121] Location No. Name 0001–1000 Max. 20 characters ENTER ENTER [122] Verification Code Personal Identification Number (PIN) [122] Location No. 0001–1000 Max. 10 digits ENTER ENTER WARNING There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification number (PIN) (verification code PIN or extension PIN) of the PBX.

  • Page 30: Main Processing (Mpr) Software Version Reference

    2.1 PT Programming [190] Main Processing (MPR) Software Version Reference [190] MPR Version Reference only ENTER PT Programming Manual...

  • Page 31: Timer Programming

    2.1 PT Programming 2.1.5 Timer Programming [200] Hold Recall Time [200] Time 0–240 s ENTER ENTER (HOLD) [201] Transfer Recall Time [201] Time 1–240 s ENTER ENTER [203] Intercept Time [203] Time No. Time No. Time 1 Day/2 Lunch 1–240 s ENTER ENTER 3 Break/4 Night...

  • Page 32: Call Duration Count Starting Time For Lcot

    2.1 PT Programming [208] Call Duration Count Starting Time for LCOT [208] Time 0–60 s ENTER ENTER [209] DISA Delayed Answer Time [209] Time 0–30 s ENTER ENTER [210] DISA Trunk-to-Trunk Call Prolong Time [210] Time 0–7 min ENTER ENTER [211] DISA Intercept Time [211] Time...

  • Page 33: Trs/Barring/Ars Programming

    Location No. 2–6 001–100 Max. 16 digits ENTER ENTER [303] Special Carrier Access Code [303] Location No. Carrier Access Code KX-TDA30: 01–20 Max. 16 digits ENTER ENTER KX-TDA100: 01–20 KX-TDA200: 01–20 KX-TDA600: 001–100 [304] Emergency Number [304] Emergency No. Location No.

  • Page 34: Ars Leading Number

    Leading No. 0001–1000 Max. 16 digits ENTER ENTER [322] ARS Routing Plan Table Number [322] Location No. Plan Table No. 0001–1000 KX-TDA30: 01–16 ENTER ENTER KX-TDA100: 01–16 KX-TDA200: 01–16 KX-TDA600: 01–48 [325] ARS Exception Number [325] Location No. Exception No.

  • Page 35: Ars Routing Plan Table (1-16) (Kx-Tda30/Kx-Tda100/Kx-Tda200 Only)

    2.1 PT Programming [331–346] ARS Routing Plan Table (1–16) (KX-TDA30/KX-TDA100/KX- TDA200 only) [331–346] Day No. Priority ARS Time No. 0 Sun/1 Mon/2 Tue/ 1 TimeA/2 TimeB/ 1–6 ENTER 3 Wed/4 Thu/5 Fri/6 Sat 3 TimeC/4 TimeD Carrier Table No. KX-TDA30: 1–10/None ENTER KX-TDA100: 1–10/None...

  • Page 36: Ars Carrier Access Code

    2.1 PT Programming [353] ARS Carrier Access Code [353] Carrier Table No. Carrier Access Code KX-TDA30: 01–10 Max. 32 digits ENTER ENTER KX-TDA100: 01–10 KX-TDA200: 01–10 KX-TDA600: 01–48 PT Programming Manual...

  • Page 37: Trunk Programming

    3 digits Max. 20 characters ENTER ENTER [402] LCOT/BRI Trunk Group Number [402] Trunk Group No. Trunk No. 3 digits KX-TDA30: 01–64 KX-TDA100: 01–64 ENTER ENTER KX-TDA200: 01–64 KX-TDA600: 01–96 [409] LCOT/BRI Trunk Number Reference [409] Slot No. Port No.

  • Page 38: Lcot Dtmf Minimum Duration

    2.1 PT Programming [412] LCOT DTMF Minimum Duration [412] Slot No. Port No. SELECT 80/160 ms ENTER ENTER [413] LCOT CPC Signal Detection Time—Outgoing [413] Slot No. Port No. Mode No. 0: None/1: 6.5/ ENTER ENTER 2–113: (N–1)×8 ms [414] LCOT CPC Signal Detection Time—Incoming [414] Mode No.

  • Page 39: Bri Network Type

    2.1 PT Programming [420] BRI Network Type [420] Slot No. Port No. Network Type 00–56 ENTER ENTER [421] BRI DIL/DDI/MSN Selection [421] Slot No. Port No. SELECT DIL/DDI/MSN ENTER ENTER [422] BRI Subscriber Number [422] Slot No. Port No. Subscriber No. Max.

  • Page 40: Bri Tei Mode

    2.1 PT Programming [427] BRI TEI Mode [427] Slot No. Port No. 00–63 (for Fix)/ ENTER ENTER ENTER Clear (for Automatic) Note After changing this setting, perform [902] Slot Card Reset to enable the new setting. [450] DIL 1:1 Destination [450] Slot No.

  • Page 41: Trunk Group Intercept Destination (Not Applicable For Mpr Software File Version 3.1000 Or Later)

    [470] Trunk Group Intercept Destination (not applicable for MPR Software File Version 3.1000 or later) [470] Trunk Group No. Time No. Destination No. 1 Day/2 Lunch/ KX-TDA30: 01–64 Max. 32 digits 3 Break/4 Night KX-TDA100: 01–64 ENTER KX-TDA200: 01–64 KX-TDA600: 01–96...

  • Page 42: Disa Continuous Signal Detection

    2.1 PT Programming [476] DISA Continuous Signal Detection [476] Trunk Group No. SELECT KX-TDA30: 01–64 No Detect/ ENTER ENTER KX-TDA100: 01–64 Detect KX-TDA200: 01–64 KX-TDA600: 01–96 [477] DISA Cyclic Signal Detection [477] Trunk Group No. SELECT KX-TDA30: 01–64 No Detect/...

  • Page 43: Cos Programming

    [500] Time No. COS No. 1 Day/2 Lunch/ 01–64 ENTER 3 Break/4 Night Trunk Group No. SELECT (AUTO ANS/MESSAGE) KX-TDA30: 01–64 ENTER (HOLD) Disable/Enable KX-TDA100: 01–64 KX-TDA200: 01–64 KX-TDA600: 01–96 To the Next To the Next Trunk Group COS No.

  • Page 44: Executive Busy Override

    2.1 PT Programming [505] Executive Busy Override [505] COS No. SELECT Disable/ 01–64 ENTER ENTER Enable [506] Executive Busy Override Deny [506] COS No. SELECT Disable/ 01–64 ENTER ENTER Enable [507] DND Override [507] COS No. SELECT Disable/ 01–64 ENTER ENTER Enable [508] Account Code Mode...

  • Page 45: Permission For Door Open Access

    2.1 PT Programming [512] Permission for Door Open Access [512] COS No. SELECT Disable/ 01–64 ENTER ENTER Enable [514] Time Service Manual Switching [514] COS No. SELECT Disable/ 01–64 ENTER ENTER Enable [515] Wireless XDP Parallel Mode for Paired Telephone [515] COS No.

  • Page 46: Extension Programming

    SDN buttons customised for that device will be deleted. [602] Class of Service [602] Extn. No. COS No. 01–64 ENTER ENTER [603] Extension User Group [603] Extn. No. Extn. User Group No. KX-TDA30: 01–32 ENTER ENTER KX-TDA100: 01–32 KX-TDA200: 01–32 KX-TDA600: 01–96 PT Programming Manual...

  • Page 47: Extension Intercept Destination

    Max. 16 digits ENTER ENTER [620] Incoming Call Distribution Group Member Incoming Call [620] Location No. Extn. No. Distribution KX-TDA30: 01–32 ENTER Group No. KX-TDA100: 01–32 KX-TDA200: 01–32 001–128 KX-TDA600: 001–128 ENTER [621] Incoming Call Distribution Group Delayed Ringing Incoming Call [621] Location No.

  • Page 48: Incoming Call Distribution Group Name

    2.1 PT Programming [623] Incoming Call Distribution Group Name Incoming Call [623] Name Distribution Max. 20 characters Group No. ENTER ENTER 001–128 [624] Incoming Call Distribution Group Distribution Method Incoming Call [624] SELECT Distribution Ring/UCD/ ENTER ENTER Group No. Priority Hunt 001–128 [625] Destination for Overflow Time Expiration Incoming Call...

  • Page 49: Queuing Call Capacity

    Group No. ENTER 001–128 [630] Queuing Time Table Incoming Call [630] Time No. Table No. Distribution 1 Day/2 Lunch/ KX-TDA30: 01–64 Group No. ENTER 3 Break/4 Night KX-TDA100: 01–64 KX-TDA200: 01–64 001–128 KX-TDA600: 001–128 ENTER [631] Sequences in Queuing Time Table [631] Table No.

  • Page 50: Extension User Groups Of A Paging Group

    2.1 PT Programming [640] Extension User Groups of a Paging Group [640] Paging Group No. Extn. User Group No. SELECT KX-TDA30: 01–32 KX-TDA30: 001–032 No/Yes ENTER KX-TDA100: 01–32 KX-TDA100: 001–032 KX-TDA200: 01–32 KX-TDA200: 001–032 KX-TDA600: 01–96 KX-TDA600: 001–096 ENTER [641] External Pagers of a Paging Group [641] Paging Group No.

  • Page 51: Idle Extension Hunting Group Member

    2.1 PT Programming [681] Idle Extension Hunting Group Member [681] Hunting Group No. Location No. 01–16 KX-TDA30: 01–64 ENTER KX-TDA100: 01–64 KX-TDA200: 01–64 KX-TDA600: 001–128 Extn. No. ENTER [690] PS Registration [690] PS No. Extn. No. To the PS operation...

  • Page 52: Personal Identification Number (Pin) For Ps Registration

    2.1 PT Programming [692] Personal Identification Number (PIN) for PS Registration [692] PIN for PS Registration 4 digits ENTER ENTER 1234 [699] CS Status Reference [699] Slot No. Port No. CS Status Reference only ENTER PT Programming Manual...

  • Page 53: Resource/Interface Programming

    To the Desired Pager No. NEXT CANCEL [KX-TDA30] [700] Pager No. Extn. No. (HOLD) ENTER ENTER [710] Music Source Selection for BGM (with the KX-TDA30)/BGM2 (with the KX-TDA100/KX-TDA200/KX-TDA600) [710] SELECT (AUTO ANS/ MESSAGE) ENTER ENTER External/Internal1/ Internal2 [711] Music on Hold [711] Music Source No.

  • Page 54: Doorphone Call Destination

    Doorphone No. Slot No. Port No. Reference only 1–4 ENTER [730] Outgoing Message (OGM) Floating Extension Number [730] Message No. Extn. No. KX-TDA30: 01–32 ENTER ENTER KX-TDA100: 01–64 KX-TDA200: 01–64 KX-TDA600: 01–64 [731] Outgoing Message (OGM) Name [731] Message No. Name KX-TDA30: 01–32...

  • Page 55: Disa Security Mode

    2.1 PT Programming [732] DISA Security Mode [732] SELECT None/ Trunk/All ENTER ENTER PT Programming Manual...

  • Page 56: Smdr & Maintenance Programming

    2.1 PT Programming 2.1.11 SMDR & Maintenance Programming [800] RS-232C Parameter—New Line Code [800] Location SELECT (AUTO ANS/MESSAGE) ENTER ENTER CR+LF/CR (HOLD) [800] RS-232C Parameter—Baud Rate [800] Location SELECT 2400/4800/9600/ 19200/38400/57600/ ENTER ENTER 115200 bps [800] RS-232C Parameter—Word Length [800] Location SELECT 7/8 bits...

  • Page 57: Smdr Skip Perforation

    2.1 PT Programming [803] SMDR Skip Perforation [803] Skip Perforation 0–95 lines ENTER ENTER [804] SMDR Outgoing Call Printing [804] SELECT No print/Print ENTER ENTER [805] SMDR Incoming Call Printing [805] SELECT No print/Print ENTER ENTER [810] Remote Programming [810] SELECT Disable/ Enable...

  • Page 58: Card Programming

    2.1 PT Programming 2.1.12 Card Programming [900] Slot Card Type Reference [900] Slot No. Card Name Reference only (HOLD) ENTER [901] Slot Card Deletion [901] Slot No. Delete Confirming the ENTER ENTER deleting operation. To the Next Slot No. To the Desired Slot No. NEXT CANCEL [902] Slot Card Reset...

  • Page 59: Appendix

    Section 3 Appendix PT Programming Manual...

  • Page 60: Revision History

    3.1 Revision History Revision History 3.1.1 KX-TDA600 PLMPR Software File Version 3.1xxx Changed Contents • [007] DSS Console Paired Telephone • [470] Trunk Group Intercept Destination (not applicable for MPR Software File Version 3.1000 or later) • [601] Terminal Device Assignment PT Programming Manual...

  • Page 61: Feature Programming References

    [322] ARS Routing Plan Table Number • [325] ARS Exception Number • [330] ARS Routing Plan Time Table • [331–346] ARS Routing Plan Table (1–16) (KX-TDA30/KX-TDA100/KX-TDA200 only) • [347] ARS Routing Plan Table (1–48) (KX-TDA600 only) • [350] ARS Carrier Name •...
  • Page 62 3.2 Feature Programming References • [504] Call Forwarding to Trunk • [605] Call Forwarding—No Answer Time Feature Guide Reference 1.3.1.2 Call Forwarding (FWD) Call Hold • [200] Hold Recall Time Feature Guide Reference 1.13.1 Call Hold Call Pickup • [650] Extension User Groups of a Pickup Group Feature Guide Reference 1.4.1.3 Call Pickup Call Transfer...
  • Page 63 3.2 Feature Programming References 1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP) Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG • [003] Extension Number • [004] Extension Name Feature Guide Reference 1.30.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/ Connected Name Identification Presentation (CNIP/CONP)—by QSIG Class of Service (COS) •...
  • Page 64 3.2 Feature Programming References • [476] DISA Continuous Signal Detection • [477] DISA Cyclic Signal Detection • [604] Extension Intercept Destination • [730] Outgoing Message (OGM) Floating Extension Number • [731] Outgoing Message (OGM) Name • [732] DISA Security Mode Feature Guide Reference 1.17.6 Direct Inward System Access (DISA) Display Information...
  • Page 65 3.2 Feature Programming References Extension Dial Lock • [510] TRS/Barring Level for Extension Dial Lock Feature Guide Reference 1.9.3 Extension Dial Lock Extension Personal Identification Number (PIN) • [005] Extension Personal Identification Number (PIN) Feature Guide Reference 1.28.1 Extension Personal Identification Number (PIN) Extension Port Configuration •...
  • Page 66 3.2 Feature Programming References Group Call Distribution • [621] Incoming Call Distribution Group Delayed Ringing • [624] Incoming Call Distribution Group Distribution Method • [632] Maximum Number of Agents Feature Guide Reference 1.2.2.2 Group Call Distribution Host PBX Access Code (Access Code to the Telephone Company from a Host PBX) •...
  • Page 67 3.2 Feature Programming References Integrated Services Digital Network (ISDN) • [420] BRI Network Type • [424] BRI Layer 1 Active Mode • [425] BRI Layer 2 Active Mode • [426] BRI Configuration • [427] BRI TEI Mode Feature Guide Reference 1.21.1 Integrated Services Digital Network (ISDN) Intercept Routing •...
  • Page 68 [426] BRI Configuration Feature Guide Reference 1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service Music on Hold • [710] Music Source Selection for BGM (with the KX-TDA30)/BGM2 (with the KX-TDA100/ KX-TDA200/KX-TDA600) • [711] Music on Hold Feature Guide Reference 1.13.4 Music on Hold Network Direct Station Selection (NDSS) •...
  • Page 69 3.2 Feature Programming References • [621] Incoming Call Distribution Group Delayed Ringing • [622] Incoming Call Distribution Group Floating Extension Number • [624] Incoming Call Distribution Group Distribution Method • [629] Queuing Hurry-up Level Feature Guide Reference 1.2.2.3 Outside Destinations in Incoming Call Distribution Group Overflow Feature •...
  • Page 70 3.2 Feature Programming References PS Directory • [001] System Speed Dialling Number • [002] System Speed Dialling Name • [004] Extension Name Feature Guide Reference 1.25.3 PS Directory PS Ring Group • [620] Incoming Call Distribution Group Member Feature Guide Reference 1.25.2 PS Ring Group PS Roaming by Network ICD Group •...
  • Page 71 3.2 Feature Programming References Software Upgrading • [190] Main Processing (MPR) Software Version Reference Feature Guide Reference 2.3.8 Software Upgrading Special Carrier Access Code • [303] Special Carrier Access Code Feature Guide Reference 1.5.4.9 Special Carrier Access Code Speed Dialling—Personal/System •...
  • Page 72 3.2 Feature Programming References Feature Guide Reference 1.30.1 TIE Line Service Time Service • [101] Time Service Switching Mode • [102] Time Service Starting Time • [514] Time Service Manual Switching Feature Guide Reference 2.2.4 Time Service Toll Restriction (TRS)/Call Barring (Barring) •...
  • Page 73 3.2 Feature Programming References Verification Code Entry • [120] Verification Code • [121] Verification Code Name • [122] Verification Code Personal Identification Number (PIN) • [123] Verification Code COS Number Feature Guide Reference 1.9.6 Verification Code Entry Virtual PS • [690] PS Registration Feature Guide Reference 1.25.6 Virtual PS...
  • Page 74 Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. 2005 Panasonic Communications Co., Ltd. All Rights Reserved.

This manual is also suitable for:

Kx-tda100Kx-tda200Kx-tda600

Table of Contents