Executive Busy Override - Panasonic KX-TDA30 Features Manual

1.7 Busy Line/Busy Party Features
1.7.2

Executive Busy Override

Description
Allows an extension user to interrupt an existing call to establish a three-party conference call.
Executive Busy Override Deny:
It is possible for extension users to prevent their calls from being intercepted by another extension user.
Conditions
• COS programming determines extension users who can use the Executive Busy Override (→ Executive
Busy Override [505]) and set the Executive Busy Override Deny mode (→ Executive Busy Override
Deny [506]).
• This feature does not work when the busy extension is in one of the following conditions:
a)
Executive Busy Override Deny or Data Line Security (→ 1.10.5 Data Line Security) has been set.
b)
While being monitored by another extension (→ 1.7.3 Call Monitor).
c)
While receiving OHCA (→ 1.7.4.3 Off-hook Call Announcement (OHCA)) or Whisper OHCA (→
1.7.4.4 Whisper OHCA).
d)
During a Conference call (→ 1.13.1 Conference Features).
e)
During a doorphone call (→ 1.16.1 Doorphone Call).
f)
While Live Call Screening (LCS) or Two-way Record is activated (→ 1.23.3 Voice Mail DPT (Digital)
Integration).
g)
During Consultation Hold.
(Consultation Hold: Allows an extension user to place a call on hold temporarily to perform Call
Transfer, Conference, or Call Splitting.)
• This feature is not available for a trunk-to-trunk call via DISA.
User Manual References
1.2.4 When the Dialled Line is Busy or There is No Answer
1.7.7 Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)
100 Feature Guide