Headset Operation - Panasonic KX-TDA30 Features Manual

1.10 Conversation Features

1.10.4 Headset Operation

Description
This PBX allows the use of headset-compatible PTs. A PT user can talk to another party without lifting the
handset.
For connection and operation, refer to the Operating Instructions for the headset.
This feature is also known as Handset/Headset Selection.
Conditions
• Hardware Requirement: An optional headset.
• If headset mode is on, pressing the SP-PHONE button activates the headset, not the built-in speaker.
• To set headset mode on a DPT, use personal programming (Headset Operation) or press the Headset
button. To set headset mode on an APT, use the handset/headset selector provided on the set and/or
on the headset.
• Headset Button
A flexible button on a DPT can be customised as a Headset button. It is possible to assign a Headset
button to a flexible button on an APT, but the button will not function.
• Answer/Release Button
A flexible button can be customised as an Answer button or a Release button. Such buttons are useful
for headset operation. It is possible to answer an incoming call by pressing an Answer button. While
hearing the Call Waiting tone during a conversation, pressing an Answer button enables one to answer
the second call by placing the current call on hold. Pressing a Release button enables one to disconnect
the line during or after conversation, or to complete a Call Transfer.
• It is possible to switch from headset mode to hands-free mode or vice versa during a conversation by
pressing the Headset button.
• Headset users cannot use the following features:
– Automatic Redial (→ 1.6.1.4 Last Number Redial)
– Receiving OHCA (→ 1.7.4.3 Off-hook Call Announcement (OHCA))
– Receiving Whisper OHCA (→ 1.7.4.4 Whisper OHCA)
Feature Guide References
1.19.2 Flexible Buttons
User Manual References
1.3.5 Using the ANSWER/RELEASE Button
1.4.8 Using the Headset (Headset Operation)
3.1.2 Settings on the Programming Mode
126 Feature Guide