Panasonic KX-TDA30 Features Manual page 64

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA30:
Table of Contents

Advertisement

1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
[Available Destinations]
Wired Extension (PT/SLT/ISDN Extension/T1-
OPX)
PS
Incoming Call Distribution Group
PS Ring Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. +
Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
*: If an extension user is not permitted by COS to call a certain extension (→ 1.1.2.2 Internal Call Block),
the FWD feature will not function if that extension is set as the forwarding destination.
Conditions
[General]
FWD for Trunk Calls/Intercom Calls
The extension user can set the FWD feature for trunk calls, for intercom calls, or for both.
FWD from Incoming Call Distribution Group (Group FWD)
COS programming determines the incoming call distribution groups that can use this feature.
FWD to Trunk
COS programming determines the extensions or incoming call distribution groups that can forward calls
externally (→ Call Forwarding to Trunk [504]).
The original extension's TRS/Barring and ARS still apply to the forwarded call.
Trunk Call Duration
If a call between an extension user and an outside party, or between two outside parties is established,
the call duration can be restricted by a system timer (→ Extension-to-Trunk Call Duration [472] and
Trunk-to-Trunk Call Duration [473]). If the timer expires, the line will be disconnected. (→ 1.10.8 Trunk
Call Limitation)
Multiple FWD
Calls can be forwarded up to four times. The following forwarding features are counted as Multiple FWD:
64
Feature Guide
Destination
Condition for Original Extension/
Availability
Incoming Call Distribution Group
Only available when FWD to
extension is allowed through COS
programming.*
Only available for incoming trunk
calls. Incoming intercom and
doorphone calls cannot be forwarded
to a DISA floating extension number.
Only available when FWD to trunk is
allowed through COS programming.
Only available when FWD to trunk is
allowed through COS programming.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100Kx-tda200

Table of Contents