Panasonic KX-TDA30 Features Manual page 237

Number in
the Pattern
(6) Ring
(7) Duration
(8) Acc Code
(Account Code)
(9) CD (Condition
Code)
(10) Cost
[Programmable Items]
Item
Outgoing trunk call
Incoming trunk call
Outgoing intercom call
Log-in/Log-out status
ARS dial
Caller's identification
DID/DDI number
Item
Shows the ring duration before answering a call in Minutes/
Seconds.
Shows the duration of the trunk call in Hours/Minutes/Seconds.
Shows the account code appended to the call. (→ 1.5.4.3 Account
Code Entry)
Shows other call information with the following codes:
CL: Collect call
TR: Transfer
FW: FWD to trunk
D0: Call using DISA or TIE line service
RM: Remote maintenance (modem) (→ 2.3.1 PC Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Shows the call charge.
Controls whether the outgoing trunk calls are shown. This setting
is common throughout the PBX (→ SMDR Outgoing Call Printing
[804]). COS programming is also required.
Controls whether the incoming trunk calls are shown (→ SMDR
Incoming Call Printing [805]).
Controls whether the outgoing intercom calls are recorded.
Controls whether the log-in/log-out status is recorded.
Controls whether the user-dialled number or the modified number
is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (→ 1.9.1 Automatic Route
Selection (ARS))
Controls whether the caller's identification number, name, number
and name, or nothing is shown. If "none" is selected, <I> will not
be shown.
Controls whether the DID/DDI number, name, number and name,
or nothing is shown. If "none" is selected, <D> will not be shown.
1.25 Administrative Information Features
Description
Description
Feature Guide 237