Panasonic KX-TDA30 Features Manual page 119

[Programming Procedures]
1.
ARS Mode Assignment (→ ARS Mode [320])
1
It is possible to select whether ARS operates when an extension user makes a call using any Idle Line
Access method or when an extension user makes a call using any Trunk Access method. (→ 1.5.5.3
Trunk Access)
2.
Leading Number Exception Table
Store the telephone numbers that will avoid using the ARS feature.
2
ARS Leading Number Exception Table
Location
No.
001 033555
002 06456
:
: → ARS Exception Number [325]
*1
3.
Leading Number Table
Store the area codes and/or telephone numbers as leading number that will be routed by the ARS
feature. In this table, the Routing Plan (refer to "4. Routing Plan Table
each number.
The additional (remain) number of digits must be assigned only when "#", for example, is needed after
a dialled number. The "#" is added after the assigned number of digits of dialled number (excluding a
leading number).
3
ARS Leading Number Table
Location Leading
No. No.
0001
0002
0003
0444
:
: → ARS Leading Number [321]
*1
: → ARS Routing Plan Table Number [322]
*2
If a dialled number matches a leading number, the number will be modified according to the
corresponding Routing Plan Table and the modified number will be sent to the trunk when the assigned
additional (remain) number of digits are dialled.
If a dialled number matches multiple leading number entries, the leading number entry with the lowest
numbered location will have priority.
2
Leading No.
*1
Exception
:
Assignment
3
Additional (Remain)
*1
No. of Digits
039 7
03 0
5
: :
1.9 Automatic Route Selection (ARS) Features
Assignment
Routing Plan
*2
Table No.
1
4
5
:
4 Assignment") is selected for
Feature Guide 119