Ctp1000 Series Platform Overview; Introducing Ctp Platforms; Ctp1002 Platform; Figure 1: Ctp1002 Chassis (Front View) - Juniper CTP1000 Series Hardware Manual

Circuit to packet platforms

Hide thumbs Also See for CTP1000 Series:

Table of Contents

CHAPTER 1

CTP1000 Series Platform Overview

Introducing CTP Platforms on page 3

CTP1002 Platform on page 3

CTP1004 Platform on page 5

CTP1012 Platform on page 7

Juniper Networks CTP Series Circuit to Packet platforms provide advanced technology

and features required to reliably transport legacy time-division multiplexing (TDM) and

other circuit-based applications across next-generation IP networks. CTP platforms

create an IP packet flow from a serial data or analog voice connection at one end and

provide the necessary processing to re-create the serial bit stream or analog signal from

the received packet flow at the other end.

CTP platforms provide compact and lightweight chassis, high port density, and multiple

Ethernet interfaces. Each CTP platform runs the CTP operating system (CTPOS) and

can be managed by the Juniper Networks CTPView Network Management System, a

secure, Web-based management tool for provisioning, managing, running diagnostics,

monitoring, and reporting on all CTP devices and circuits in the network.

The Juniper Networks CTP1002 Circuit to Packet platform is a 1-U high, half-rack wide

chassis designed for tabletop or shelf installation. It can also be installed in a rack with

the supplied rack-mounting kit. The CTP1002 platform does not have any removable

interface modules or cooling fans, but does use a removable Type II CompactFlash card.

It is available in an AC-powered version only. See

The front panel comprises the following components (see

Figure 1 on page

3):

Table of Contents

Ctp1002 Ctp1004 Ctp1012