3Com 4007 Command Reference Manual page 212

212 C 11: P
HAPTER ACKET
CB9000> connect 6.01
Menu options (Corebuilder 9000-94DC8): --------------------------------
list
display
create
delete
edit
load
assign
unassign
portGroup
Type "q" to return to the previous menu or ? for help.
-----------------------------------------------------------------------
CB9000@slot6.1 [12-E/FEN-TX-L3] (): bridge packetFilter load
Packet filter 1 stored.
F
ILTERS
The syntax of the Management Module's download command is:
download module <slot#.01> filter <IP address> <filename>
In the syntax of the
of download (
filter
though the filter is not transferred to that module slot at this point.
3 From the Management Module CLI prompt, the user connects to the
Multilayer Switching Module in slot 6 (subslot 01) and loads the filter
onto the Multilayer Switching Module using the
command.
load
When you issue this command, the module does not prompt you for any
options. Instead, the module simply looks for the filter on the
Management Module. If it finds it, it loads it. If it does not find it, it prints
the message
Filter not found
.
4 Lastly, the user lists the loaded filters with the
command and confirms the contents of the filter with the
list
packetfilter display
command, the user must specify the type
download
) and for which slot (
.
- List all packet filters
- Display a packet filter
- Create a packet filter
- Delete a packet filter
- Edit a packet filter
- Load a packet filter
- Assign a packet filter
- Unassign a packet filter
- Administer port groups
command.
) the filter is destined even
6.01
bridge packetFilter
bridge packetfilter
bridge