Selecting Menu Options; Navigating Through The Menus - 3Com 4007 Command Reference Manual

Selecting Menu
Options
Navigating
Through the Menus
To select a menu option, at the prompt enter the complete text or
enough of the name to uniquely identify it within the particular menu.
Example: to access the module submenu, at the top-level prompt simply
enter:
module
Menu options are not case sensitive.
When you enter a menu option or command correctly, either you move
to the next menu in the hierarchy, or the Administration Console displays
information (a prompt or a screen display) for the option that you
entered.
If you enter the menu option incorrectly, a message indicates that your
entry is not valid or is ambiguous. Reenter the option from the point at
which it became incorrect or expand an abbreviated command until it
becomes unambiguous.
When a new menu appears, the selection prompt (with its choices in
parentheses) changes to reflect your progression through the menus.
Example: If you enter
at the module prompt, the prompt changes to reflect the
spanningTree
current level:
CB9000@slot5.1 [36-E/FEN-TX-L2](bridge/spanningTree):
The Administration Console provides several shortcuts:
Press Esc (the Escape key) — To move quickly to the top-level menu
without backtracking through each intermediate menu. The top-level
menu immediately appears.
Enter q —
To move up through the menu hierarchy, that is, to move to the
menu that is one level higher in the hierarchy
To cancel an operation that is currently in progress. The previous
menu appears.
at the top-level menu and then
bridge

Selecting Menu Options

31