3Com 4007 Command Reference Manual page 513

3com 4007: reference guide

Hide thumbs Also See for 4007:

Table of Contents

Nonflow Classifier Procedure

To accept the default or existing values that appear in brackets [ ], press

1 Enter a classifier number in the range of from 400 through 498.

Numbers 401 through 407 are predefined nonflow classifiers with

applied controls; numbers 420, 430, 440, 450, 460, 470, 480, and 490

are predefined nonflow classifiers without controls. If you have not

removed any of the predefined nonflow classifiers, you need to remove

them before you can define another nonflow classifier. (With the default

classifier, there is a limit of 16 predefined nonflow classifiers.)

2 Enter the classifier name (a unique name of up to 32 characters long).

3 Enter a cast type.

For a nonflow classifier, the options are

4 Enter one or any protocols.

The options are

5 If you choose custom, enter the protocol type (

For ethernet type enter the hexidecimal value.

6 Enter one or all IEEE 802.1p tags. Specify any combination of values in

the range of from 0 through 7, or

type, enter the DSAP and SSAP hexidecimal values.