3Com 4007 Command Reference Manual page 515

Prompt Description
Protocol type IP or other protocol
type, if applicable, that
is associated with the
flow or nonflow
classifier.
Source IP For flow classifiers only,
address IP address of the source.
Source IP For flow classifiers only,
address mask source IP address mask,
or how many portions of
the IP address you want
to match. (Example:
255.255.255.0 matches
the first three portions
of the specified IP
address.)
Destination IP For flow classifiers only,
address destination IP address.
Destination IP For flow classifiers only,
address mask destination IP address
mask, or how many
portions of the IP
address you want to
match.
For flow classifiers only,
Start and end
of TCP or UDP start and end of the TCP
source port or UDP source port
range range.
Specify as small a range
as possible. The start
value determines the
end value.
Possible Values
Flow classifiers: IP
protocol type with
TCP, UDP, or all
Nonflow classifiers:
TCP, IP, IPX,
AppleTalk, any, or
custom
? (for a list of
selectable values)
Up to 255.255.255.255
Up to four portions
(255.255.255.255)
Up to 255.255.255.255
Up to four portions
(255.255.255.255)
0 – 65535
515
[Default]
Current
protocol
type
0.0.0.0
(factory
default,
wildcard
match), or
current
value
0.0.0.0
(factory
default,
wildcard
match), or
current
value
0.0.0.0
(factory
default), or
current
value
0.0.0.0
(factory
default), or
current
value
0 and
65535
(factory
defaults),
or current
values