Bridge Packetfilter Assign - 3Com 4007 Command Reference Manual

214 C 11: P
HAPTER ACKET
bridge packetFilter
assign
Layer 2
Switching
Modules
Multilayer
Switching
Modules
F
ILTERS
Assigns a selected packet filter to a port or set of ports (port group) on a
Multilayer Switching Module.
Valid Minimum Abbreviation
b pa a
Important Considerations
When you assign a packet filter to one or more ports, you must assign
a processing path. The path (transmit all, transmit multicast, receive
all, receive multicast, or receive internal) of a port can have only one
packet filter assigned to it; however, you can assign a single packet
filter to multiple paths and ports.
If you try to assign a filter to a port that already has a filter assigned,
the module displays a warning message and the assignment fails.
After you assign the filter, ports and paths are removed from the list of
possible values (which are listed in the Options table).
Possible values for filters (n) depend on the number of created or
loaded filters on the module.
Possible values for bridge ports (n) depend on the number of existing
bridge ports on the module.
To specify multiple ports, use the hyphen (-) to indicate ranges, and
commas to indicate individual, non-contiguous ports. To specify
multiple paths, separate the paths with commas.
Options
Prompt
Select filter
Select bridge ports
Description Possible Values
1 – n
Identifier (id
number) of the
? (for a list of valid
filter that you want
filter identifiers)
to assign
Number of the 1 – n
bridge port to
all
which you want to
assign the selected ? (for a list of valid
filter ports)
[Default]
Current valid
selected filter
Current valid
selected bridge
port