Ip Ospf Virtuallinks Define - 3Com 4007 Command Reference Manual

ip ospf virtualLinks
define
Layer 2
Switching
Modules
Multilayer
Switching
Modules
Creates a new virtual link to a destination router.
Valid Minimum Abbreviation
ip o v def
Important Considerations
All areas of an OSPF routing domain must connect to the backbone
area. In cases where an area border router does not have direct,
physical access to the backbone, you must configure a virtual link to
act as a logical link to the backbone area.
You can define up to 32 virtual links per router.
Options
Prompt Description
Transit area Area ID (in the form
n.n.n.n where 0 <= n <= 255)
through which the link is going
Target ID of the target router, which is
router the router where the virtual
link terminates
Possible Values [Default]
Currently defined –
area ID
Valid IP address of –
OSPF area border
router
403