Bridge Port Summary - 3Com 4007 Command Reference Manual

3com 4007: reference guide
Hide thumbs Also See for 4007:
Table of Contents

Advertisement

bridge port summary

Layer 2
Switching
Modules
Multilayer
Switching
Modules
Displays a summary of bridge port information, including the Spanning
Tree Protocol (STP) configurations for selected bridge ports.
Valid Minimum Abbreviation
b po su
Important Considerations
For resilient links, the main and standby ports are shown in ascending
order.
When you are prompted to select ports, you can enter
matrix of information about the bridge ports. This matrix is useful, for
example, if you have trunks configured but forget which port is the
anchor port. You must use the anchor port number to display a port
summary for a trunk.
Fields in the Bridge Port Summary Display
Field
Description
fwdTransitions
Number of times that the port has entered the forwarding
state since you enabled STP or rebooted the module. This
value is useful for determining the relative stability of the
topology.
gvrpState
Whether GARP VLAN Registration Protocol (GARP) is
(Multilayer
enabled or disabled on the port. For GVRP to function on
Switching
the port, you must enable it on the port as well as the
Modules only)
entire bridge. To configure GVRP on a port, see "bridge
port gvrpState" later in this chapter. To configure GVRP
on the bridge, see "bridge gvrpState" in Chapter 6.
linkState
State of the link (up or down), that is, whether it is
available for communication.
portId
Port identification, which includes the port priority value
(first 2 digits after "0x") and the logical port number (last
2 digits). Both are shown as hexidecimal values.
portNumber
Logical index number that the module assigns to the
bridge port, which may not correspond with the physical
port number depending on your configuration. (For
example, when you define a trunk, only the anchor port
receives a portNumber.) As you add and remove logical
ports, portNumbers are reassigned so that they remain
consecutive.
rxDiscards
Total number of frames received on the bridge port that
have been discarded. This value reflects a summary of all
statistics that end with Discs, Discards, or Filters.
bridge port summary
131
to see a
?

Advertisement

Table of Contents
loading

Table of Contents