Ip Rip Routeaggregation Mode - 3Com 4007 Command Reference Manual

3com 4007: reference guide

Hide thumbs Also See for 4007:

Table of Contents

routeAggregation

Sets the route aggregation mode on a Multilayer Switching Module.

Valid Minimum Abbreviation

Important Considerations

Route aggregation mode determines which route table entries are

sent during a RIP Version 2 update.

If route aggregation mode is

and "collapse" route table entries for all subnets of a directly

connected network. For example, if route aggregation is

and the module is advertising subnets 150.100.31.0 and

150.100.32.0, only the entry for network 150.100.0.0 is sent in

the update. With RIP Version 2, you must enable route aggregation

mode if you want the interface to collapse the route table entries

and function like RIP-1.

If route aggregation mode is

update sends all routing table entries.

IP interfaces

Index number of the interfaces

for which you want to set the

route aggregation mode

Whether you want to

implement route aggregation

on the selected interface

, RIP-2 can function like RIP-1

(the default), a RIP-2

Possible Values

interface indexes

? (for a list of

interface indexes)