Ip Rip Policy Modify - 3Com 4007 Command Reference Manual

ip rip policy modify

Layer 2
Switching
Modules
Multilayer
Switching
Modules
Modifies an existing route policy for RIP on a Multilayer Switching
Module.
Valid Minimum Abbreviation
ip ri pol m
Important Considerations
Route policies are classified as follows:
Import policies import routing information from what RIP learns
from a router/neighbor to the unified routing table. (You can also
import routing information from Open Shortest Path First (OSPF).)
Export policies send information from the routing table to RIP and
RIP routers, which controls what is going out on the wire to the RIP
domain. (You can also export from the routing table to OSPF.)
The module assigns an index number to each policy that you define.
This index takes into account all route policies set on the module, RIP
and OSPF, so the assigned index can be higher than you may expect.
Options
Prompt Description
Policy type Type of policy
Origin Whether or not the route is a
protocols static route (for export policies
(export) only)
Source address IP address of the source router
Route address Route that is associated with the
source network
Route subnet Subnet mask that is associated
mask with the route
Possible Values [Default]
import import
export
RIP –
OSPF
all
A valid IP 0.0.0.0
address
0.0.0.0
all
A valid IP 0.0.0.0
address
0.0.0.0
all
A valid mask Based on
source
network (for
example,
255.255.0.0)
291