Qos Control Detail - 3Com 4007 Command Reference Manual

qos control detail

Layer 2
Switching
Modules
Multilayer
Switching
Modules
Displays detailed information about the QoS controls that you specify on
a Multilayer Switching Module.
Valid Minimum Abbreviation
q co det
Options
Prompt Description
Control Number of the control for
number which you want detail
information
Fields in the QoS Control Detail Display
Field Description
802.1p tag IEEE 802.1p priority tag value (0 – 7)that is applied to
forwarded frames. Can be defined for both flow and
nonflow classifiers.
Burst Burst size in KBytes.
Classifiers controlled Classifiers that this control affects.
Control (number) Number of the control.
Control name Name that you assign to the control.
End time Control end time.
Excess loss eligible For receivePort or aggregate rate limit types, whether excess
packets are loss eligible.
Excess service For receivePort or aggregate rate limit type, service level for
excess packets.
Limit Rate limit in KBytes/sec or percentage.
Loss eligible Whether conforming packets are loss eligible. A loss-eligible
packet can be dropped if the transmit queue for which it is
destined is over its threshold.
Ports Receive ports for which you want to enable the rate limit.
Rate limits control Number of the control that the rate limit affects.
Service Service level for the conforming packets (high, best, low,
or drop).
Possible Values [Default]
One or more –
configured
controls
all
? (for a list of
selectable
controls)
521