Bridge -Wide And Bridge Port Parameters - 3Com 4007 Implementation Manual

3com 4007: install guide

Hide thumbs Also See for 4007:

Table of Contents

This chapter provides an overview of bridging concepts and

implementation guidelines for modules in the Switch 4007. The chapter

covers these topics:

Bridging Overview

Key Bridging Concepts

Bridging Implementation Summary

Key Guidelines for Implementation

STP Terms and Concepts

STP Bridge and Port Parameters

MAC Address Table Design

Address Aging

Frame Processing

IP Fragmentation

IPX SNAP Translation

Broadcast and Multicast Limits

GARP VLAN Registration Protocol (GVRP)

Standards, Protocols, and Related Reading

You can manage most bridge-wide and bridge port commands in either

of these ways:

From the bridge menu of the Administration Console after you log

in to the Management Module and connect to the module's slot.

From the Bridge folder of the Web Management software.

The management interfaces display "

Management Module as the Enterprise Management Engine (EME)

because the heritage of the Switch 4007 is the CoreBuilder

" and refer to the

9000 switch.

4007r - switch