Displaying Bridge Port Information - 3Com LANPLEX 6000 User Manual

13
Displaying
Bridge Port
Information
Top-Level Menu
system
display
ethernet
summary
mode
fddi
detail
ipFragmentation
tokenring
multicastLimit
ipxSnapTranslation
bridge
stpState
trFddiMode
ip
stpCost
addressThreshold
snmp
stpPriority
agingTime
analyzer
srRingNumber
stpState
script
address
stpPriority
logout
stpMaxAge
stpHelloTime
stpForwardDelay
srBridgeNumber
port
packetFilter
A
DMINISTERING
This chapter describes how to view bridge port information and configure
the following:
Multicast packet threshold
Spanning Tree Protocol (STP) parameters
Bridge port addresses
Bridge port information includes the STP configurations for the bridge port.
You can display this information in both summary and detail formats.
To display bridge information:
1 From the top level of the Administration Console, enter:
bridge port summary
OR
bridge port detail
You are prompted for slot number(s).
2 Enter the number(s) of the slot(s) or
bridges in the system.
You are prompted for the port type.
3 Enter ,
Ethernet FDDI
You are prompted for port number(s).
4 Enter the number(s) of the port(s) or
ports on the bridge.
B
RIDGE
to view port parameters for all
all
, , or .
tokenring all
to view port parameters for all
all
P
ORTS