Level 2 Programming; Advanced Product Settings - Henny Penny LVE-102 Operation Manual

5-1. ADVANCED PRODUCT
SETTINGS
Dec. 2007
SECTION 5. LEVEL 2 PROGRAMMING
Used to access the following:
• Advanced changes to product settings
• Error code log
• Password programming
• Alert Tone/Volume
�����������������������
• ����������
1. Press
display, followed by ENTER CODE.
2. ������������������������������
"COMP" show in the displays.
3. Press right
in the displays.
4. Use the
press the desired product button
5. Press right
in the left display and "MODIFY" "YES NO" shows in the right
display. Press the
button to choose another product.
>Load Compensation, Load Compensation Reference,
Full Heat, PC Factor<
ü
6. If
with the load compensation value. This automatically adjusts the
time to account for the size and temperature of the cooking load.
Press the product buttons
this value of 0 to 20.
7. Press
along with the load compensation average temperature. (if load
compensation is set to "OFF", then "_ _ _" shows in display
and setting cannot be programmed) This is the average cooking
temperature for each product. The timer speeds up at temperatures
above this setting and slows down at temperatures below this
setting. Press the product buttons
change this value.
and hold and buttons until LEVEL - 2 shows in the
ü
button and 'SELECT PRODUCT' and "-P 1-" show
and buttons to scroll through the 40 products, or
ü
button and the product (ex: NUGGETS) shows
ü
button to change this product, or press the X
button was pressed, "LD COMP" shows in the display along
button until "LCMP REF" shows in the display
5-1
Model LVE-102, 103, 104
to change
to