Auto Top-Off - Henny Penny LVE-102 Operation Manual

3-11. AUTO TOP-OFF

Figure 1
Figure 2
Figure 3
Sept. 2007
During normal operation, the control automatically monitors the oil
level in the vat. If the control senses the oil level too low, the unit
pumps oil from the JIB into the vat to keep the oil at the proper level.
Filling the JIB using the RTI system
1. Control displays "JIB IS LOW" and amber light is lit on the front
of the fryer. Figure 1.
2. Open the door, that has the RTI switch (Figure 2). Press & hold the
ADD side of the RTI switch to add oil to the JIB.
Replacing the JIB (locations without RTI)
1. Control displays "JIB IS LOW" and amber light is lit on the front
of the fryer. Figure 1.
2. Open right door and pull JIB from unit. Pull the cap from top of JIB
and discard empty JIB and replace with full one. Figure 3
3-11
Model LVE-102, 103, 104