Henny Penny LVE-102 Operation Manual page 46

4-3. DEEP CLEAN MODE
(Continued)
Aug. 2009
5. Split vat fryers only! Display shows "LEFT RGHT", asking you
to select which vat will be cleaned. Press
vat, or X button for the right vat.
6. Display shows "OIL RMVD" "YES NO"
7. If oil has already been removed, press
down to "Solution Added?" step.
If vat still has oil, press X button and display shows "DISPOSE"
ü
"YES NO". Press
button to exit Deep Clean Mode. (If control suspects oil in drain
pan "CAUTION IS THERE OIL IN PAN? YES NO" may show in
display. Make sure drain pan is empty before proceeding )
JIB systems only! Display shows "IS DISPOSAL UNIT IN
PLACE?" "YES NO". If "NO" is selected, display shows "INSERT
DISPOSAL UNIT". Once disposal unit is in place press
for YES and display shows "DRAINING" and oil drains from vat.
Bulk systems only! Display shows "CHK PAN" "YES NO" if the
����������������������������
YES, display shows "DRAINING" and oil drains from vat. Once
frypot is empty, open the door that has the RTI switch (at left) and
press the "DISPOSE" button on the RTI switch until drain pan is
empty.
Display then shows "VAT EMTY", "YES NO". Press
when ready and display shows "CLN VAT COMPLETE" "YES
NO". Once the vat has been cleaned, press
valve closes.
8. Display shows "SOLUTION ADDED?" "YES NO". Mix McD
���������������������������������
���������������������
display shows "START CLEAN" "YES NO".
ü
9. Press button display shows "CLEANING", and a countdown
timer. Heat regulates to 195°F (91°C) for this step for one hour.
Add water as needed during cleaning process to keep solution 1 in.
����������������
To stop the cleaning cycle early, press
"QUIT DEEP CLN" "YES NO". Press the
rest of the countdown time and proceed to the rinse steps.
4-5
Model LVE-102, 103, 104
ü
button to select left
ü
button and control skips
button to dispose of the oil, or press X
ü
button and drain
Then press
button. The display shows
X
ü
button to cancel the
ü
button
ü
button for
ü
button
ü
button and