4-4. FRYER SETUP
Aug. 2009
This mode has the same settings as seen upon initial start-up of the
fryer. See Setup Mode, Section 3-3.
1. Press and hold
and
display, followed by ENTER CODE.
2. �������������������������������
"SELECTN" show in the displays.
3. Press
button 3 times and "FRYER SETUP" show in the
displays.
ü
4. Press
button and *SETUP* *MODE* shows in the displays,
followed by, "LANGUAGE" on the left display, "ENGLISH" on
the right display.
Use
or
buttons to change the operation display to,
"FRANCAIS", "CAN FREN", "ESPANOL", "PORTUG",
"DEUTSCHE", "SVENSKI", "RUSSIAN".
Press
to continue with the other set-up items which include:
•
ZONE - USA or NON-USA
•
TEMP FORMAT -
F or
o
•
TIME FORMAT - 12-HR OR 24-HR
•
ENTER TIME - Time of day (use product buttons to change)
•
ENTER TIME - AM OR PM
•
DATE FORMAT - US OR INTERNATIONAL
•
ENTER DATE - Today's date (use product buttons to change)
•
FRYER TYPE - GAS or ELEC
•
VAT TYPE - FULL OR SPLIT
•
DISPOSE BULK OIL:
- 1. NO or VAC: Select for vats drained with an oil drain caddy.
- 2. RTI: Select for vats drained with an RTI switch.
- 3. REAR: Select for vats without a secondary switch.
- 4. FRONT: Currently not used (01/18).
•
• OIL SYSTEM - JIB (no RTI system)/BULK (has RTI system)
•
• DAYLIGHT SAVING TIME - 1.OFF; 2.US (2007 & after);
•
3.EURO; 4.FSA (US before 2007)
Unless otherwise indicated, use
4-8
Model LVE-102, 103, 104
buttons until LEVEL - 1 shows in the
C
o
or
to change settings.